Edge Raptor™ Integrations
Jan 1 2022 at 12:00 AM
This document lists the devices and systems supported by Edge Raptor.
Device and vendor specific integrations
Integrations in this category have been developed by IoT.nxt® for very specific protocols and hardware. While they may have a certain degree of customisation, they have been designed with specific use-cases in mind.
| Device or System Name | Description or Vendor Example | Readiness |
|---|---|---|
| ADS1015 ADC | General low-power Analog to digital converter board. | Release |
| Aircons | Panasonic, LG, Alliance, Gree, Jetair | Release |
| Aircon Controller Boards | Inala, Tamashi | Release |
| BACnet Building Management System | BACnet is a system controlling building HVACs, lighting, etc. | Release |
| Batteries | Shoto 50Ah, Shoto 100Ah, Narada 50Ah, Narada 50Ah, Leoch 100Ah, Leoch 150Ah, Huawei 100B1V1, ZTE, Durathon, Redflow | Release |
| Bluelock | Smart Security solution board for door access control via Bluetooth | Release |
| BRID Air Purifier | - | Release |
| Current Sensor (INA219) | - | Release |
| DC Fan | PWM control (adjustable internally, smart cooling algorithm supported). PWM feedback is also supported. | Release |
| Dell 3001 MEMS Sensors | Internal sensors: Accelerometer, Pressure, Temperature and Humidity | Beta |
| DS18B20 Temperature Sensor | - | Release |
| Energy Meters | Kamstrup DK-8660 3 Phase, Landis & Gyr E650 3 Phase | Release |
| Energy Meters | MicroStar DLMS | Prototype |
| Generator Controller | Deep Sea 4510, 7310, 7320 MK I and MK II | Release |
| Hardwired Alarms (Passthrough) | - | Release |
| Honeywell Alarm | - | Release |
| Idatech Fuel Cell | - | Release |
| Modberry x500 | - | Beta |
| NIST Water Pump Controller | - | Release |
| PIR (Generic) | - | Release |
| Polycomp LED Display | - | Release |
| Qwikswitch | Dimmer Device, Geyser Device, PIR Device, Relay Device, Button Device | Release |
| Rectifiers | Delta Orion, Delta PSC3, Eaton SM65, Eaton SC200, Huawei, Orion Touch | Release |
| Relays | - | Release |
| SDDI Telco_IO | Alpha, Beta | Release |
| SDDI USB | Jump Module (I2C, SPI, Two Wire, TTL Serial, 8x5V Tolerant Digital Inputs, 8x3.3V Digital Outputs), Output Module (4x Push Pull Digital Outputs), Input Module (3x Isolated Digital Inputs with 12V feeds), RS-485 Module (Isolated half-duplex rs-485 serial), 1-wire Module (One Wire), RS-232 Module (Isolated RS-232 with RTS/CTS), CAN Module (Isolated CAN bus) | Release |
| Secondary or Slave Gateways | SAM 1.5, SAM 2, RAMS IO, RAMS EC | Release |
| Siemens S7 PLC | - | Release |
| SigFox Backup Comms Device for Alarming | - | Prototype |
| Smoke Sensor | - | Release |
| Sonoff | PIR Gateways, Switches, POW, 4CH Pro | Release |
| Teltonika | - | Release |
| Venstar | - | Release |
| Vibration Sensor (MPU6050) | - | Release |
| Z-wave Plus | Smart Motion Sensor (HS1MS), Smart Smoke Sensor (HS1SA), Smart Temperature & Humidity Sensor (HS1HT), Smart Water Leakage Sensor (HS1WL), Smart Door Contact (HS1DS) | Release |
Generic integrations
The following integrations are not limited to specific devices, but instead rely on configuration and/or external integrators. They can be adapted to suite a variety of use cases.
| Generic Integration or Protocol | Description | Readiness |
|---|---|---|
| SNMP | Supports SNMP Read, Write and Traps. | Release |
| SNMP | SNMP V2 to V3 conversion, SNMP TLS | Beta |
| GPIO | - | Release |
| Bluetooth | Generic Bluetooth functionality used with Dell Gateways | Beta |
| HTTP/API | - | Release |
| I2C | - | Release |
| DLMS | Including HTTP call for auto-suspend: Raptor Passthrough to DLSM device for third-party integration, also includes generic integration with Load Profiles | Release |
| MQTT | Supports JSON and Plaintext | Release |
| Modbus | Supports Modbus BMS, RTU, TCP and RTU over TCP | Release |
| Modbus TLS | - | Beta |
| One-wire | - | Release |
| Two-wire | - | Release |
| SPI | - | Release |
| TTL Serial | Supports RS-485 and RS-232 | Release |
| CanBus | - | Release |
Modbus integration
For Edge Raptor Modbus integration, please see the Modbus Integration documentation.