Device Catalogue

The BMS Gateway runs windows and contains certain software needed to scan BMS networks. It also provides the ability to remotely dial in to the Raptor gateway.

Asus Edge Raptor Gateway without LTE

Asus Edge Raptor Gateway with LTE

PV100 Gateway with 2GB RAM,16GB eMMC, iMX8M CPU,WiFi/BT Module + Antennas, High density cable with 4xisolated DI/DO, 2xRS-232/422/485, 3 in 1 Puk Antenna

PV100 Gateway with 2GB RAM,16GB eMMC, iMX8M CPU,WiFi/BT Module,LTE + Antennas,High density cable with 4xisolated DI/DO, 2xRS-232/422/485, 1xMic-in, 1xLine-out, 2xCANbus, 3 in 1 Puk Antenna

A state-of-the-art sensor detects the rotation of the volumetric chamber so that all types of gearings are eliminated, thus eliminating aging with the passage of time.

A state-of-the-art sensor detects the rotation of the volumetric chamber so that all types of gearings are eliminated, thus eliminating aging with the passage of time.

Dell Edge Gateway 3001 with Raptor firmware for integration into smart systems

The new generation of IZAR Radio Compact Inductive Waterbox G4 is designed for mobile reading and long-range fixed network remote reading of Diehl Meters.

The SDM120Modbus offers a low-cost solution to metering low Amp circuits (45A). The SDM120 range works directly connected to a maximum load 45A AC circuit. The SDM120Modbus measures a vast range of parameters, including Voltage, Current and Power Factor.

SDM630-MT-MID 100A Direct Connected Single/Three Phase Multifunction Dinrail Meter Multi Tarrif

SDM230M Series DIN Rail Mounted Metering Single Phase 100A MID (Multi-Function With Serial Communication)

LT-20P is a solar LoRaWAN tracker designed for asset tracking purposes. The high performance solar panel can provide sufficient power for continuous LoRa transmission. Its light-weight and compact design allows you to easily install on asset surface. LT-20P is your best choice for outdoor long-lasting tracking applications.

The LT-10 is a LoRaWAN solar ear tag GPS tracker designed for a wide range of animals tracking use cases. The high performance solar cell can last for many years of regular use. The LT-10 design is compact and durable.

The HALO smart sensor is an all-in-one environmental and security device which provides monitoring of: Audio analytics (Abnormal noise level, gunshot, shouting, excessive banging and bullying detection), Air quality (AQI, VOC, PM, Smoke, THC), Chemical (CO, CO2, NH3, N2), Environmental (Temperature, Humidity, Tamper, Pressure, LUX)

The HALO smart sensor is an all-in-one environmental and security device which provides monitoring of: Audio analytics (Abnormal noise level, gunshot, shouting, excessive banging and bullying detection). Air quality (AQI, VOC, PM, Vape, Vape THC, Smoking) Chemical (CO, CO2, NH3, N2) Environmental (Temperature, Humidity, Tamper, LUX) EMERGENCY ESCAPE & ALERT LIGHTING, Motion Detection, Occupancy, Panic Button (CUSTOM SENSOR OPTIONS)

The HALO smart sensor is an all-in-one environmental and security device which provides monitoring of: Audio analytics (Abnormal noise level, gunshot, shouting, excessive banging and bullying detection). Air quality (AQI, VOC, PM, Vape, Vape THC, Smoking), Air quality (AQI, VOC, PM, Vape, Vape THC, Smoking) Chemical (CO, CO2, NH3, N2) Environmental (Temperature, Humidity, Tamper, LUX) EMERGENCY ESCAPE & ALERT LIGHTING, Motion Detection, Occupancy, People Counting, Panic Button (CUSTOM SENSOR OPTIONS)

The Multical has ultrasonic precision from the very first drop, and boasts superior stability in the entire dynamic range and with intelligent information codes and alarms.

The OMNIPOWER three phase electricity meter is optimised for smart metering systems and offer multiple features designed to maximise the utilisation of utility assets. Voltage quality measurement, logging of events and real-time load profile generation for all four quadrants are standard features, and in addition, the meter supports a wide range of communication types. The OMNIPOWER three phase meter is prepared for smart home applications via the HAN interface.

The OMNIPOWER three phase electricity meter is optimised for smart metering systems and offer multiple features designed to maximise the utilisation of utility assets. Voltage quality measurement, logging of events and real-time load profile generation for all four quadrants are standard features, and in addition, the meter supports a wide range of communication types. The OMNIPOWER three phase meter is prepared for smart home applications via the HAN interface.

ThinkCentre M90n-1, Intel Celeron 4305UE (2.00GHz, 2MB), No Operating System, 4.0GB, 1x128GB SSD M.2 2242 PCIe, Intel UHD Graphics 6 10,Fibocom L850-GL,Intel9560ac+BT, 3 Year On-site

ThinkCentre M90n-1, Intel Core(TM) i3-8145UE (2.20GHz, ), No Operating System, 8.0GB, 1x128GB SSD M.2 2242 PCIe, Intel UHD 620,Fibocom L850-GL,Intel9560ac+BT, 3 Year On-site

A versatile, intelligent NB-IoT/ CaT-M1 RTU suitable for many applications.

Milesight AM107 Series consists of multiple smart sensors that are built specifically for indoor ambient measurements. Built in Sensors: Temperature, Humidity, Motion, Light, TVOC, Barometric Pressure and CO2. E-ink display, NFC enabled, IP30 rated

Milesight EM300 LoRaWAN Temperature & Humidity, IP67 Rated, NFC enabled, Temperature : -30 degrees C ~ 70 degrees C, -30 degrees C ~ 70 degrees C, Humidity: 0% ~ 100% RH

Milesight EM300 LoRaWAN Magnetic Contact Switch Sensor, IP67 Rated, NFC enabled, Detection Distance?20 ~ 30mm, Temperature : -30 degrees C ~ 70 degrees C, Humidity?0% ~ 100% RH

Milesight EM300 LoRaWAN Spot Leakage Detection Sensor, Trigger Condition: When water level reaches 5mm, Temperature : -30 degrees C ~ 70 degrees C, Humidity: 0% ~ 100% RH

Milesight EM300 LoRaWAN Zone Leakage Detection Sensor, Trigger Condition: When water level reaches 5mm, Temperature : -30 degrees C ~ 70 degrees C, Humidity: 0% ~ 100% RH

UC300 IoT Controller is rich in Industrial Interfaces and is ideal for monitoring and controlling multiple field sensors or devices simultaneously. 4 x DI + 2 x DO, 1 x RS232 + 1 x RS485, 2 x 4~20 mA, 2 x 0~10 V, 2 x PT100 RTD Input. OTAA/ABP Class C. 2G/3G/4G

Milesight VS121 AI powered sensor uses anonymous people counting data to help you see and understand your workspace utilization.

EM500-SWL provides highly accurate water level measurement for a variety of applications in harsh environments, such as reservoirs, water tanks and groundwater levels. NFC enabled and IP68 rated

EM500-SWL provides highly accurate water level measurement for a variety of applications in harsh environments, such as reservoirs, water tanks and groundwater levels. NFC enabled and IP68 rated

EM500-SWL provides highly accurate water level measurement for a variety of applications in harsh environments, such as reservoirs, water tanks and groundwater levels. NFC enabled and IP68 rated

EM500-PP sensor is designed for measuring pressures from liquids and gases in order to realize the pressure monitoring of tank level or leakage in pipes.

Protect cattle from theft and monitor your cattle, bulls, heifers, or calves with mOOvement GPS ear tag. The GPS Ear tags for cattle are solar-powered and have a GPS sensor, Accelerometer, and Bluetooth sensor inbuilt.

The Q17 boasts a smaller, lighter design with a considerable increase in performance and a variety of other improved hardware components and firmware upgrades. Q17 and Generation Q brings Quuppa, once again to the forefront as the definitive leader in Real-Time Locating Systems.

The Quuppa Q35 Locator is the newest addition to the Generation Q product family, designed for use in more challenging, industrial & outdoor environments.

The Quuppa QT1-1 Tag is designed to be easily attached to a person or object. It is lightweight, waterproof, shockproof and IP67 classified, houses a 3-axis accelerometer, a programmable button and an LED.

The Quuppa QT1 Module is a PCB-module to be integrated into custom designed mechanics or other devices. You can find the QT1 inside many Quuppa Partner's tags, as well as the QT1-1 Tag.

Raspberry Pi 4 Model B 4GB

NPE-X500-M316-1.2GHZ 1GB 16GB WIFI-BT-ETH-FC-Modberry

Teltonika FMB120 GPRS GNSS Tracker with Bluetooth is a small and professional tracker with internal high gain GSM and GNSS antennas, which is able to collect device coordinates and other useful data and transfer them via GSM network to server. This device is perfectly suitable for applications where location acquirement of remote objects is needed: fleet management, car rental companies, taxi companies, public transport, logistics companies, personal cars and so on. FMB120 can perform tasks on remote objects, such as monitoring engine status, controlling truck's door etc.

Teltonika FMB920 is compact and smart tracker with Bluetooth connectivity, internal High Gain GNSS and GSM antennas and integrated backup battery. FMB920 is designed for light vehicles tracking in applications like insurance telematics, rental cars, recovery of stolen cars, public safety services, delivery transport, taxi and much more. Inputs/outputs extend device usage scenarios. Digital input can be used for ignition, door or alarm button status monitoring. Vehicle remote immobilizing may be achieved using FMB920 digital output.

Teltonika FMB910 is a low-cost version of the FMB920 tracker. The main differences are the overall size of the device, different GNSS antenna design, and some components being bigger in size, thus the change in dimensions. The device has all internal antennas, that ensure easy installation with no need to wire the antennas. Like other Teltonika trackers, FMB910 is assembled by robots, which eliminates human error and ensures high quality of the device. The tracker has a digital input to monitor ignition or to connect an alarm button. Vehicle remote immobilizing may be achieved using a digital output. Bluetooth connectivity expands peripherals' connectivity even more. Teltonika FMB910 can be used in a variety of applications like basic track and trace or recovery of stolen vehicles. It can be installed in light vehicles, motorbikes, and even trucks.

Teltonika FMB900 is compact and smart tracker with Bluetooth connectivity, internal High Gain GNSS and GSM antennas. FMB900 is designed for light vehicles tracking in applications like insurance telematics, rental cars, recovery of stolen cars, public safety services, delivery transport, taxi and much more. Inputs/outputs extend device usage scenarios. Digital input can be used for ignition, door or alarm button status monitoring. Vehicle remote immobilizing may be achieved using FMB900 digital output.

FMB130 is ADVANCED tracker with internal GNSS, GSM antennas, configurable digital/analogue inputs/negative input/impulse inputs, three DOUT outputs, Bluetooth connectivity and backup battery.

FMB140 is an ADVANCED GSM/GNSS/Bluetooth tracker with integrated CAN data processor. It is compact 2 in 1 solution: GPS tracker and CAN adapter inside! Device allows to read CAN data from a wide range of various vehicles, including light & electric vehicles, trucks, buses and special machinery. Depending on exact software version FMB140 can be used in advanced applications as heavy logistics, delivery services, utility transport.

Newly introduced FMC130 is a small ADVANCED series device with 4G (LTE Cat 1) network coverage including 3G (UMTS), 2G (GSM) fallback compatibility. It comes equipped with internal GNSS, LTE antennas, configurable digital/analog/negative and impulse inputs, three DOUT outputs, Bluetooth connectivity, and backup battery.

LV-CAN200 is designed to acquire data from 1500 different models of light vehicles, trucks and buses.

Professional solution for companies wishing to monitor CAN data from any kind of transport. More than 2500 different models of light vehicles, trucks, buses, agriculture transport and special transport are currently supported

Teltonika FMB640 is GNSS, GSM terminal for PROFESSIONAL applications. FMB640 is designed for complex solutions, where one device can do multiple tasks. FMB640 features like FMS CAN data (J1939), fuel CAN data (J1708), tachograph live data (K-line), remote tachograph file download, various third party RS232 or RS485 devices support and Dual-SIM will maximize your fleet efficiency. Terminal is suitable for applications like international logistics, refrigerated transport, agriculture, construction & mining, security & emergency services and even more.

Teltonika FMC640 is a PROFESSIONAL series device with 4G (LTE Cat 1) network coverage including 3G (UMTS), 2G (GSM) fallback compatibility. Device equipped with GNSS/LTE and Bluetooth modules. FMC640 will maximize your fleet efficiency with features like FMS CAN data (J1939), fuel CAN data (J1708), tachograph live data (K-Line), remote tachograph file download, various third party RS232 or RS485 devices support and Dual-SIM. Terminal is suitable for applications like international logistics, refrigerated transport, agriculture, construction & mining, security & emergency services and even more.

TRB145 is a compact industrial LTE Cat 1 gateway equipped with an RS485 connector, Micro-USB, a powerful CPU and RutOS software for advanced networking solutions.

TRB245 is a compact industrial 4G (LTE) gateway equipped with an Ethernet port, a connector block which includes pins for I/O, RS232, RS485, GPS and RutOS software for advanced networking solutions.

The Xovis 3D Sensors deliver live footfall counting data with the highest accuracy on the market.