1. Dev kit pinouts
2. Configuring your Micro Raptor Dev Kit
   1. Processor Pinouts
   2. STLINK-V3MODS

The Micro Raptor Dev Kit is a desktop kit that allows developers to develop software and test applications for the Micro Raptor in a controlled enviroment.

Please Note: The Dev kit is not the same as a Demo kit. The latter is used to integrate and evaluate the capabilities of the Micro Raptor in industrial environments, while the Dev kit is only used for development purposes only.

The Micro Raptor™ Dev Kit is a desktop kit that allows developers to develop software and test applications for the Micro Raptor™ in a controlled environment.

Please Note: The Dev kit is not the same as a Demo kit. The latter is used to integrate and evaluate the capabilities of the Micro Raptor™ in industrial environments, while the Dev kit is only used for development purposes only.

Figure 1 - Micro Raptor Dev kit pinouts.

Dev kit pinouts

Figure 1 - Micro Raptor Dev kit

Configuring your Micro Raptor Dev Kit

Processor Pinouts

For a detailed breakdown of the Micro Raptor processor pinouts please view the processor datasheet here.

STLINK-V3MODS

The STLINK-V3MODS is a small size debugging and programming probe for the Micro Raptor.

The JTAG/SWD interfaces are used to communicate with any STM32 microcontroller located on an application board. The TLINK-V3MODS also provides a Virtual COM port interface enabling the host PC to communicate with the target microcontroller through one UART, and bridge interfaces (SPI, I2C, CAN, GPIOs) simplifying for instance the field programming through bootloader.