1. Overview
2. Module features
   1. Storage
   2. Network
   3. Time Keep
3. Supported Wired Interfaces

Overview

The Micro Raptor™ Base Board is a small embedded gateway module aimed at rapid productisation of custom and scalable solutions. This base module holds up to 60 GPIO pins which can be used for device integration. It is capable of Wi-Fi and Bluetooth connectivity out of the box with a mini PCIe expansion slot intended for cellular connectivity modems. The module integrates all components needed for secure cloud connectivity, data logging and peripheral control.

Figure 1 - Micro Raptor Base Board

Module features

• Footprint size of 35 x 70 mm
• Remote firmware updates
• End-to-end encryption [TLS/DTLS]
• Configuration layer [settings, end-points]
• Rich set of peripherals;
  • Analog sensing
  • I2C
  • CAN Bus
  • SPI
  • UART
• Selection of cellular compatible modems
  • 2G/3G/4G
  • NB-IOT/CAT-M1

Storage

• 256 MB on-chip flash
• 1 MB on-chip non-volatile RAM
• MicroSD slot for bulk storage [Data Logging]

Network

• MicroSIM slot for cellular connectivity

Time Keep

• Button battery slot for on-chip Real Time Clock

Figure 2 - Micro Raptor Base Board

Supported Wired Interfaces

• RS-232 / RS-485
  • Modbus
  • DLMS
• CAN bus
  • J1939
• SPI
  • SPI-to-Ethernet
  • Sensor Integration
• I2C
  • Accelerometer
  • Integrated Battery Management
  • Sensor Integration
• One-Wire
  • Temperature Sensor Networks
• Analog
  • 4-20mA Current Sensors
  • ADC Interfaces
  • Sensor Integration